EVER STAGE/1 In STARTER Type SPEC

Features:

n 35W HID (High Intensity Discharge) AC Ballast

n Wide input voltage: 9 ~16 /22~36 VDC

n No flickering during warming up and steady state

n Great EMI performance

n Hot re-strike capability

n Reverse polarity protection

n Short circuit / Open circuit protection

General Characteristics

Parameter	Specification	Note
Operating temperature	-40 ~ 85 °C
Light Output	>50% at 2 sec, >70% at 3 sec
Ballast Life	2000 hours	Typical
Radiated EMI susceptibility	Per GM9112	Class B passed
Radiated EMI emissions	Per GM9114 methods
Cooling	Air Cooling
Maximum cable length	2.0 meters

Electrical Output

Parameter	Specification	Note
Output waveform	350 ± 100 Hz square wave
Steady state output power	35.0 ± 2 W
Open circuit protection	Latch off after 1.5 sec max (less than 20 strikes)
Maximum output current	6A initial lamp on, decreasing to 0.5A by 40 seconds	Lamp current
Maximum output power	80W	Start-up state
Steady state output voltage	60 to 120 V AC
Striking voltage	19 ~ 35 KV
Flickering	No flickering during warm up and steady state

Electrical Input

Parameter	Specification	Note
Input voltage	+8 to 32 V DC	Steady state
Max. In rush current	25A at initial 50ms, 6A at 2 sec, decreasing to and keeping at 3.2A within 30 sec
Max. steady state input power	45 W (8 to 32 V)
Input turn on	+8 V and above
Input turn off	Below 6 V
Reverse polarity protection	No damage to ballast with -40V
Conducted EMI susceptibility	Per GM9105 and GM9116
Conducted EMI emission	Per GM9115