EVER STAGE/1 is SEPARATE type SPEC

Features:

n 35W HID (High Intensity Discharge) AC Ballast

n Wide input voltage: 9 ~16 /22~36 VDC

n No flickering during warming up and steady state

n Great EMI performance

n Hot re-strike capability

n Reverse polarity protection

n Short circuit / Open circuit protection

General Characteristics

Parameter	Specification	Note
Operating temperature	-40 ~ 95 °C
Light Output	>50% at 2 sec, >80% at 5 sec
Ballast Life	2000 hours	Typical
Radiated EMI susceptibility	Per GM9112	Class B passed
Radiated EMI emissions	Per GM9114 methods
Cooling	Air Cooling

Electrical Output

Parameter	Specification	Note
Output waveform	200 ± 30 Hz square wave
Steady state output power	35.0 ± 3 W
Open circuit protection	Latch off after 4 sec max (less than 20 strikes)
Short circuit protection	Latch off after 1.5 sec max(no strikes)
Steady state output voltage	70 to 110 V AC
Striking voltage	19 ~ 26 KV
Flickering	No flickering during warm up and steady state

Electrical Input

Parameter	Specification	Note
Input voltage	9~16 / 22~36 V DC	Steady state
Max. In rush current	20A at initial 50ms, 8A at 2 sec, decreasing to and keeping at 3.2A within 45 sec
Max. steady state input power	52 W (8 to 32 V)
Reverse voltage protection	No damage to ballast with -40V
Conducted EMI susceptibility	Per GM9105 and GM9116
Conducted EMI emission	Per GM9115